Community Forums

**NLOVNIT** · 04-28-2019, 02:58 PM

I got 2 sets with our coach. I want to make 1 more set as a back up. I've been able to get blanks to cut for all but the ignition key. No dealer has the blank for that & I can't get it from any of my local big box or even mom-n-pop hardware stores. Can't find it on Amazon or eBay.

Any ideas? Do I need to call Red Bay?

Lori-

wkenhall · 04-28-2019, 03:30 PM

I had to use a locksmith

450Donn · 04-28-2019, 03:39 PM

Find a real locksmith shop. They will have it.

**NLOVNIT** · 04-28-2019, 03:43 PM

Locksmith it is. Thank you!

Lori-

MarkMaxPayne · 04-29-2019, 11:09 AM

FYI: On the Wayfarer, since it is built on a Mercedes Sprinter cab chassis, one must go to the dealer. Have to pay for the key and the fob pairing vs DIY.

Best,
-Mark

garykk · 05-03-2019, 01:32 PM

Try this, if not the right number google TriMark and the number on the key.
https://lostakey.net/index.php?main_...ducts_id=45679

brandss · 05-03-2019, 03:00 PM

Quote:

Originally Posted by NLOVNIT

Locksmith it is. Thank you!

Lori-

Lori, if the locksmith doesn't work Tiffin will send you blanks to have a local company cut it for you. I had a hard time finding the key blank anywhere.

powerboatr · 05-03-2019, 03:20 PM

freightliner can get you the ignition blanks
i had to get one from a F/L truck center.
then a lock smith cut the blank to fit.

might call the 800 help line to get a feeler for close by shops.
i would suspect any OTR truck center may have the blanks

if a good locksmith cant help
https://www.amazon.com/Ilco-1628-P-F...C99Z7X2CB4EDHV
amazon has ilco blanks if it helps

now you want a laugh?? i have tow ignition keys from the factory when i purchased the bus...they are different and only one would work...so we had to go get a new one made

**NLOVNIT** · 05-03-2019, 03:46 PM

I don't have a FL chassis so that won't work, I wouldn't think. I've left messages at a handful of locksmith locations (I guess they're out unlocking people) but no one's called me back.

Know what you mean about the factory keys. Of the 2 factory deadbolt keys, only 1 of them worked in the lock. Had dups made from the one that does.

Thanks, Scott. I think I'm gonna have to call Red Bay for blanks.

Lori-

Chuck&Pam · 05-09-2019, 02:41 PM

On a previous gas coach I went to a locksmith for a complete set of all my keys. I had to call him a couple of times to get through to him. He works mostly from his van but he does have a storefront where I was able to meet him and get the job done.

Good luck!

txcpl · 05-10-2019, 06:33 AM

Tiffin has replacement keys or the capability to get replacement keys. They will need the key number to get you the cut key.

**NLOVNIT** · 06-14-2019, 10:26 PM

Finally got my blanks (ignition & deadbolt) from Tiffin. They "lost" my 1st online order.

Lori-

RodneyLadd · 06-15-2019, 10:04 AM

I went to a locksmith shop...They are Tri Mark keys they weren't cheap but well worth it.

**NLOVNIT** · 06-15-2019, 10:36 AM

Yeah, I was done chasing locksmiths (see post 9). If they don't want my business, I gladly gave it to Tiffin. Could order right from their online store.

Lori-