Bounder: 1997 Bounder slide out and hydraulic jacks not working

[Bowtie Greg]

So I'm at a loss trying to get my slide out to function on my 97 Bounder..
1st question is the hydraulic pump for the slide out operate on 110 only or is that a 12v pump ?
I did try hooking a 12v battery direct to the pump to jump it, but very minimal sound came from it... I assume the mounting bolts are the ground and the 2 cables on the end are for 2 different directions....110v ???
I've had rv plugged in and also ran the generator....can't get slide out or levellers to work... Any direction will help ??

[Waiter21]

Is the slide hydraulic?

I doubt any of the pumps would be wired for 110..

[Bowtie Greg]

Found a bad relay and also a bad wire to the box by the pump...Got era working...
Yaaaayyyyy.. thanks for the input though.. Much appreciated

[Bowtie Greg]

So we chased power.. and there is power at the pump and power coming up to the control panel inside, so guessing maybe the mother board for the levellers is shot...frisk this is frustrating... Anyone know who sells the little mother boards for the levellers for this '97 Bounder ??