2000 Discovery Headlight bulb replacement Help

[harleyguy88]

I can't believe I'm posting this for help but I just can't figure it out. How do you replace the headlight bulbs in a 2000 Fleetwood Discovery. I took off the four retaining clips on the lens cover thinking it would pop off and I would be able to replace the bulbs. However, can not get it to pop off and thinking if I put too much on the screw driver I may end up cracking the lens cover. I looked insider the front access panel to the generator and can see the wires going into the fiberglass shrould for headlights. However that hole is too small I would never get my fingers in there to pop the bulb out. If anybody has change their low beam headlight bulb can you please tell me how to do it? Just don't want to break anything. Thanks for any help.

[Dtwallace]

Is it not the socket type that you can turn and pull out from the rear????

DTW

[mchero]

Dont pull the bulb from the front. Those headlight assemblies are the same as standard automotive headlights. Replace bulbs from rear.
See if you can find a DOT number on those headlight assembly. Google that DOT number and you should be able to determine what cars have the same assemblies ( in case you need to replace).

[Jim28730]

Originally Posted by Dtwallace

Is it not the socket type that you can turn and pull out from the rear????

DTW

You are correct sir. The headlights on my 2011 Discovery are Jeep headlights and you relate the bulbs from the back.