Community Forums

PCarillon · 01-23-2015, 01:32 PM

When we get our PA from storage here in a Month and half I have a few minor fixes I need to do.This one it seems where the side panel above the Pass seat that hides the window shade and the cabinet above the door meet has dropped about 3/4".I was looking when I put it up on how this was put together and looking for screws.I didnt find any so I am assuming I need to start pulling pieces of the side panel which appears to be nailed together not screwed apart until I get to where I can see the how the panels is mounted to the side of the cabinet.Has anyone ever messed with this and can tell me if this is the right way to go about this I am attaching a picture of the area I am speaking of but its not an actual picture of ours but its the same thing. Any help would be appreciated so I dont make a mess I do not to make

**JohnRR** · 01-23-2015, 02:16 PM

If you send the coach build information to Fleetwood they will send you schematics of how it was built.

The information should be on an exterior wall decal just behind the passengers door.

MrMudstud · 01-23-2015, 08:47 PM

PCarillon, on mine it is attached to the ceiling. Mine is a little different than yours, but you can be assured the ceiling is involved. Chances are, the screw missed the rafters above the ceiling and just went through the ceiling plywood which is not very supportive. Good Luck......

PCarillon · 01-24-2015, 07:55 AM

Quote:

Originally Posted by MrMudstud

PCarillon, on mine it is attached to the ceiling. Mine is a little different than yours, but you can be assured the ceiling is involved. Chances are, the screw missed the rafters above the ceiling and just went through the ceiling plywood which is not very supportive. Good Luck......

I can see a little bit above the cabinet-panel area and I do not see any hole in the ceiling material.I dont think it was screwed to a rafter.