Quote:
Originally Posted by Rkesselus
Like Charlie said the manual switching was used before the automatic relays came into being. I had one unit with the manual switching and it had a three position two way switch center was off with other two for selecting front or rear ACs, A second switch was labeled Shore or Generator, since you have the big generator it would be wired to both ACs One leg from the generator would go directly to one AC only. I never had one with the automatic relays and don't have a clue as to how they worked. Maybe someone has knowledge of the automatics. I have a friend that had a Winnebago Brave, some where in the 90s, that had one that continually gave him problems. If I was looking for answers I would start at the breaker panel at the Converter. But from all you have done this may be old news. Good luck. Richard
|
Thanks for the reply Richard- Yes, I think I've covered most of the details you listed and then some, but I will keep searching.... What I really would appreciate would be the solution found by the person who had the EXACT same problem in my original post- His forum name is "justintime"... I had sent him a message, and hopefully he sees it soon! The most amazing part is that he had the same issue literally exactly, but didn't post the end solution!
Thank you all so very much for taking the time to respond with suggestions!
Bob