Anyone have the wiring diagram to the trailer plug for a 98 Pace Arrow Vision?

[michelb]

Hi, we have a 98 Pace Arrow Vision on a Chev chassis and our trailer lights don't work properly. It's possible that it's the '4-round' to '4-flat' adapter I'm using but I believe it's likely the actual wiring to the trailer plug that's incorrect. Anyone have the wiring diagram to it and / or any suggestions to troubleshoot? When tried using it, it ended up blowing the 20A fuse for the tail lights and before that happened, I would only get turn signals on one side, etc. I used a 'trailer light test plug' (with my 4-round adapter) and the test light did not say the wiring was correct (i.e. wiring is wrong) (I tried the same test light in my car and it worked fine so the test light does appear to work correctly).

Let me know. Thanks,
Mike

[JFGOBUCS]

Mike...Make a call to Fleetwood service, and they will fax you a complete set of wiring diagrams.

make sure you have your FIN ( fleetwood ID #) -- they need that to pull the right paperwork

[michelb]

Thanks for the suggestion.

I should have mentioned that I did get the electrical and plumbing diagram PDFs from Fleetwood a few years ago but it doesn't appear that the 'chassis' wiring is on it, only the house 12V and 120V circuits are there. I'll contact them to see if they have anything else.

[ga traveler]

If you can see the colors of the wires, The code is white- ground yelow-left turn green-right turn brown-running lights.