Bedroom Slide Tilt 02 35R SW

[Carvin Marvin]

The bd rm slide on my friends m/h when being retracted will tilt out at the top approximately 5". There are 4 bolt heads visable under the slide, two have torn the metal, the other two have pulled deep dents into the metal and will probably tear also. Don't know if Fleetwood is answering the phone these days but will try to contact them tomorrow. Any of you experienced a simular problem? Thanks for any info Marv

[Away]

I have the 02 35R and have not had a problem. The slide is large and the rails are located under the bed but not the closet. Therefore at least half of the load is not supported by the equipment. If the thing is tipping I would suspect the rail mounts are loose. All of this is under the bed and should be checked. Two people helpful to hold mattress and base board getting in there. Had to remove the lifts to raise the board. Lubricate everything while you are in there.