Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Fleetwood Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 03-15-2018, 07:46 AM   #1
Member
 
DocData757's Avatar
 
Join Date: Aug 2016
Posts: 52
Cheap Handling Fix

I recently was told about this 'CHF'. I watch the various videos on line
and it seemed simple enough so I attempted it.

Removing the bolts holding the 2 arms was easy enough but then found I could not move the main sway bar. It needs to be rotate up so the 2 arms previously disconnected arms can reach the other set of holes.

Has anyone done this themselves and had the same issue?

Should this are rotate fairly easily or am I going to have to loosen the bolts hold the 2 brackets?

Thanks,
Dave
__________________
2017 Fleetwood Bounder 35K
2016 Jeep Cherokee Overland
Blue Ox towing
DocData757 is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 03-15-2018, 08:16 AM   #2
Senior Member
 
JIMBO34PA's Avatar
 
Tiffin Owners Club
Ford Super Duty Owner
Join Date: Jun 2016
Location: Town of Beloit
Posts: 363
Send a message via AIM to JIMBO34PA Send a message via Yahoo to JIMBO34PA
It should be tough to move unless the bushings are worn out . A floor jack, 2X4 or pipe will make it move . I used a pry bar.
__________________
2016 Tiffin 34PA, 2018 Ford Edge toad, Blue OX rear track bar, Cheap handling fix, Konis, Super Steer retired Ford tech/service manager, No Worry, No Hurry. "Livin The Dream"
JIMBO34PA is offline   Reply With Quote
Old 03-15-2018, 12:28 PM   #3
RRR
Senior Member
 
Ford Super Duty Owner
Join Date: Mar 2009
Location: Oregon
Posts: 2,741
Or back off the bushing bolts a little. But put some Blue Locktite on them when you tighten them up.
__________________
2016 Bounder 34T Anniversary Edition
RRR is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cheap Handling Fix jmckinley Ford Motorhome Chassis Forum 6620 Yesterday 08:34 AM
2015 Thor Challenger 35HT Handling/Cheap Handling Fix Review wldracing Thor Industries Owner's Forum 13 08-15-2016 09:16 AM
Good Sam membership cards- Cheap! Cheap! Cheap! MSHappyCampers iRV2.com General Discussion 4 10-05-2012 07:04 AM

» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 02:45 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.