Dash Rattle

[carman999]

Hi everyone
We have a 2016 Holiday Rambler Endeavor 40 DP. We have a rattle in the left front corner of the dash. I think that I could probably find the source if I knew how the dash pad comes off. If anyone has ever had theirs off I would greatly appreciate any info. I am pretty sure REV used the same dash on many of their models.
Thanks Chet

[HerbZilla]

If you are talking about that squeak that sounds like styrofoam rubbing that actually can be fixed from the outside. Pull the generator out and then look up along the area where the dash would be. Have to stick your head in there and need a flash light. You will see 6 stainless steel bolts sticking out about 2 inches long spaced out across the front of the cab. These come loose and need to be tightened. You need long gorilla arms to get up there it is a pain. I had 4 loose ones and 2 the nuts were completely missing and this was on a new unit. After tightening up the squeak was gone. Don't overtorque but just make them good and snug.