We have a Revolution 40C and the driver's side outlets will only work off the generator and when connected to shore power. They will not function using the inverter but they work fine on the passenger side. I have checked the GFCI beneath the microwave and it is fine. I have also reset the breakers on the inverter as well. I've also checked all the fuses I know to check. Any help would be much appreciated!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Fleetwood Owners Club Freightliner Owners Club American Coach Owners Club
Join Date: Oct 2014
Location: Wyoming, Delaware
Posts: 375
I have a 2003 Revolution.
This is normal operation when on the the inverter. The inverter only powers the microwave, passenger side outlets, and the outlets for the entertainment system.
Give American coach a call the will email you electrical prints and help you with your problem . If I were guessing I would look at the last receptacle working as they pass thru to the next one, if the push terminals were used they are subject to fail over time from thermal expansion/contraction .
As mentioned only a guess the prints will hold the answer to where to look for the order of feed.
You will need the vin # or better the Fin # when you call.
Linear Mode
