Entry door lock cutout hole size

[superk]

My deadbolt works from the inside but the lock cylinder seized, and the paddle lock opens locked doors from the outside. So that means that I cant lock my coach at this point. The entire paddle needs to be replaced.

Apparantly there are a few different cutout size possibilities. Would anyone happen to know which size that fleetwood is/was using around the time my coach was created? Would be ideal to update the old paddle with one with keyless entry if possible, but I will settle for an exact replacement.

[RussOnTheRoad]

Originally Posted by superk

My deadbolt works from the inside but the lock cylinder seized, and the paddle lock opens locked doors from the outside. So that means that I cant lock my coach at this point. The entire paddle needs to be replaced.

Apparantly there are a few different cutout size possibilities. Would anyone happen to know which size that fleetwood is/was using around the time my coach was created? Would be ideal to update the old paddle with one with keyless entry if possible, but I will settle for an exact replacement.

I am pretty stupid when it comes to locks. Have you tried contacting Fleetwood? You didn't say.

When I googled paddle lock this is what I saw. I can't imagine something like this being part of your Fleetwood.

[superk]

This is visually identical to the one installed in the coach. I just need to verify if my cutout is this size. I have not contacted Fleetwood at this point, will be doing that tomorrow if this thread bears no fruit.

Trimark RV Door Lock with Dead Bolt 30-900

[pointrow]

If you go to Trimark website they have all the technical drawings available.

pointrow