My 2000 Discovery , the pre-amp is not getting 12v. I measure 5V across the two wires, fuses all chk good. I took the pre-amp out to chk at battery- good.
Any advice on tracing wire path or finding a new 12V source?
Sam, the newbie
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Problem solved. Turns out there was no problem. The reference material showed 12v at input wire. I had 5v; turns out that is all I need. The LED light does not light but the antenna works great. I found 13 stations.
Sam
Linear Mode
