Join CruisersForum Today
Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
 
Thread Tools Search this Thread Display Modes
Floor delamination
Old 09-25-2011, 04:31 PM   #1
chili's trip is offline
Member
Join Date: May 2010
Location: grand haven, mi
Posts: 34
Send a message via Yahoo to chili's trip
The floor in my 2005 Bounder 32W is delaminating between the shower and the sink, running across the hall into the bath, about 5'. The vinyl is bulged up so that it squeaks when you walk on it. I have looked for the cause and paid a service center to look without success. The shower, toilet, and bath sink is not leaking. Did find a hole in the shower skylight but is not the source of water.
The roof is tight. Resealed hookup light. Any body have any experience with
this problem?
I'd appreciate any ideas. Thanks.

__________________
  Reply With Quote
   
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 09-25-2011, 05:07 PM   #2
GGoodsell is offline
Junior Member
Join Date: May 2010
Posts: 4
I have a 2009 Bounder 32W, built in 2008 and bought by me in April, 2010 with EXACTLY the same issue. I have no detectable leaks and am debating what to do about the issue. Other than a squeak to the floor and the feel of slight flexing to the linoleum in that area I have no other issues. I've considered cutting the "bulge" into flap, re-glueing the area, and resealing the cuts I make, but haven't done so yet. I also would appreciate any suggestions that anyone may have.
__________________
  Reply With Quote
   
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Download our Mobile App






1% for the Planet
» Upcoming Rallies
No events scheduled in
the next 365 days.
» iRV2 on facebook

Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

RV & Travel Trailer Communities

Our RV & Travel Trailer sites encompasses virtually all types of Recreational Vehicles, from brand-specific to general RV communities.

» More about our RV Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities


Copyright 2002-2012 Social Knowledge, LLC All Rights Reserved.
All times are GMT -6. The time now is 09:01 PM.