Community Forums

HuskerRED · 11-08-2017, 08:36 AM

I have a new Fleetwood Discovery LXE 40G. Since delivery, the hours on the generator will not sync with the dash display. The generator has 40 hrs and the dash is stuck at 81 hrs. Camping World changed out the monitor panel and reprogrammed it. It still doesn't work and now the odometer and other readouts are messed up. Has anyone else had this problem???

sims5 · 11-08-2017, 02:03 PM

My dash, control panel, and the meter on the side of the generator all read different. I go off the one on the generator and don’t worry about the others.

MikeO58 · 11-08-2017, 02:34 PM

I think that is part of the lbcu reflash. My odometer is crazy and I believe the reflash corrects this as well.

HerbZilla · 11-09-2017, 08:51 PM

I have a 2018 LXE 40G also and my dash display still says 0 for the hours. Was reading in the tech manual that generator hours on the dash display is an option that may or may not be programmed in when Fleetwood orders them.
At least my wall panel and local meter on gen coincide so I just use those.

z3406 · 11-10-2017, 08:31 AM

May I suggest you contact freightliner. There is a recall called "Stoneridge LBCU software update" Takes care of all sorts of issues with the LBCU. See if you have an effected unit.

HuskerRED · 11-11-2017, 03:07 PM

Thank you all for the suggestions. I am taking it back to Camping World the first of December and will let you all know what I find out.

CWSWine · 11-11-2017, 04:06 PM

Quote:

Originally Posted by z3406

May I suggest you contact freightliner. There is a recall called "Stoneridge LBCU software update" Takes care of all sorts of issues with the LBCU. See if you have an effected unit.

I had my flash about week ago and the generator hours on the dash still don't reflect whats on the generator or the Fire Fly panel.