How to adjust slide on a 2004 Fleetwood revolution 38b

[revolution]

Thank you in advance for anyone who can help in this matter,


2 main issues:

a) the main slide floor is rubbing against a rivet on the motor-home which eventually will wear thru the slide and or wear off the rivet. This slide room type is the drop down floor model with the power gear electric motor.

b) the slide appears to be over extending!

My questions are as follows:

1) How does one raise the back portion of the slide to eliminate this interference?

2) It appears there are no adjustments for this, however I do notice a white plastic spacers, which if were a bit thicker, might resolve the interference concern.

3) How does one adjust the stop for the slide? It appears to be over extending and causing damage to the physical slide wall.
a) I cannot find another stops to adjust!

Thanks again,

Jack

[Tha_Rooster]

What happens if you let off the button early does everything line up? If so the extend limit should be adjusted. If you have multiple motors on that slide that run independent like mine you will need someone with a devise called a teach pendant which teaches the slide how far to come in or go out.

[revolution]

Thanks again for your response, please keep them coming!!!

per quote:

"What happens if you let off the button early does everything line up? If so the extend limit should be adjusted. If you have multiple motors on that slide that run independent like mine you will need someone with a devise called a teach pendant which teaches the slide how far to come in or go out."

******* my coach only has one motor

a) I did exactly that, I let off the button sooner, which kept the slide from going all the way out which remedies the over extending, which is great!!! But I do not know how to adjust the stops, Is this an electronic thing?

b) this however did not fix the interference concern! Still need to understand how to raise up the floor on one side to give me a little more clearance

thanks again,

Jack