Found a thread in IRV2 that explained how to reprogram the FOBS and it worked great; Readers digest version follows. . .; in your swing away door right of driver seat on the far right on the floor is the remote controller, on the far right side of this controller is a button and next to it a red LED light. On mine you removed one screw holding the controller and then you can move it out of the space to get to the button and LED on the right side. To program turn on ignition switch (not engine) and immediately press the cylindrical button 3 times. The red LED should illuminate steady. Once it does press the LOCK button several times on your FOB. Turn off your ignition and test your FOB. Mine worked great hopes this helps someone down the road......
__________________
Marty Sierocki
2005 Fleetwood Providence
|