RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Fleetwood Owner's Forum
Click Here to Login

Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 01-19-2018, 02:54 PM   #15
Senior Member
 
Join Date: Mar 2016
Location: Arizona
Posts: 272
I have the same exact problem on my 2016 Bounder 33C. Precision is also sending me a new board. Danny said the bad news is they have had a few of these failures, and it does have to do with the Comms Chip. Good news is that the main board has been updated so as to avoid this issue in the future.

Our Bounder was tucked away in storage, and I found the problem when I stopped by to run the generator under load for a while.

OP - I sent you a PM, as I would like to hear how things turned out with your repair.
__________________

Elwood58 is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 01-20-2018, 09:12 AM   #16
Junior Member
 
Join Date: Sep 2016
Posts: 9
Another Update: The Continuing Saga

Well, the FIRST replacement went fine... It's really simple to install, even for a non-electrical person like me. Problem was that they sent the right board but with the wrong programming... I have lights and vents/fans but nothing else.
Monday the new (and correctly programmed) board is due to arrive. I have fingers crossed that all will be well.
I want to say though that DANNY at Precision Circuits has been fantastic to deal with. I wish all RV-related services were as good as these folks. They obviously really care about their products and customers. Others could do well to learn from them.
Weather is somewhat better. Today is about 37F. Balmy by comparison to a few weeks ago!
Will follow up with an update after the "new" board arrives.
__________________

MarshallC is offline   Reply With Quote
Old 01-23-2018, 10:38 AM   #17
Junior Member
 
Join Date: Sep 2016
Posts: 9
FINAL Update on Bounder "Mulitplex Switches Not Working"

First, all is well. Lights, camera action....everything is working again. The 2nd board from Precision was programmed correctly and the installation was plug 'n play simple.

So, "thanks" for all the advice and help the last month as we sorted this out.

I also want to say a hearty "Thank You" to Danny at Precision Circuits. This gentleman is a fantastic customer service person. I called his supervisor to tell him how well Danny had handled our issues. Fantastic. I wish EVERY RV customer service person was as good as him and that every RV manufacturer treated their customers as well as PRECISION CIRCUITS treats theirs.

Oh yeah, it's back up to a balmy 34 F
MarshallC is offline   Reply With Quote
Old 01-23-2018, 11:21 AM   #18
Senior Member
 
Join Date: Mar 2016
Location: Arizona
Posts: 272
Glad to hear this feedback. My new board is due here on Thursday. I have also been working with Danny, and he is great. I hope my results are equally positive.
Elwood58 is offline   Reply With Quote
Old 01-26-2018, 03:44 PM   #19
Senior Member
 
Join Date: Mar 2016
Location: Arizona
Posts: 272
Illumaplex System is once again working 100%. I did manage to trip a 12v breaker along the way, but after a reset, everything came back up and worked great. Tested all functions and panels. Now just need to figure out where to go next.
Elwood58 is offline   Reply With Quote
Old 12-17-2018, 07:27 AM   #20
Junior Member
 
Join Date: Nov 2015
Posts: 9
Multiplex switches stopped working

All switches in 2016 bounder quit working
The switch panel lights but no lights come on
Lights work when door opens

Where to begin?
Bushpilotom is offline   Reply With Quote
Old 12-19-2018, 04:38 AM   #21
Member
 
American Coach Owners Club
Spartan Chassis
Join Date: Nov 2012
Posts: 88
The easiest for now is a reset. Shut off your 12 Volt house battery switch, wait about a minute, and turn the switch back on. For a few reasons, your controllers will get "confused". See if that works. If no,t repost and we will try something else.
Car1 is offline   Reply With Quote
Old 12-20-2018, 07:20 AM   #22
Junior Member
 
Join Date: Nov 2015
Posts: 9
Switches

Quote:
Originally Posted by Car1 View Post
The easiest for now is a reset. Shut off your 12 Volt house battery switch, wait about a minute, and turn the switch back on. For a few reasons, your controllers will get "confused". See if that works. If no,t repost and we will try something else.

Will try that
Just got out of Death Valley and had no service so havenít been able to check messages
__________________

Bushpilotom is offline   Reply With Quote
Reply

Tags
switch



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2014 Ventana - water pump switches stopped working. Workaround tednruthy Newmar Owner's Forum 20 05-24-2018 11:53 AM
Multiplex switches in a 2007 Beaver Marquis Marquis2007 Class A Motorhome Discussions 1 06-25-2016 10:10 PM
Multiplex system has stopped working Carl & Shelly Monaco Owner's Forum 17 11-28-2014 08:30 AM
Lesson learned - Multiplex switches pacwest Entegra Owner's Forum 1 06-15-2013 11:22 AM
Anyone stopped OR NOT stopped for pulling motorcycle trailer behind TT? tammyinwv Trailer Towing and Tow Vehicles Discussion 17 02-26-2007 08:54 PM

» Featured Campgrounds

Reviews provided by


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 03:06 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.