Power gear slide problem

[Tha_Rooster]

Does anyone know how to adjust the motor travel on a wall slide without a teach pendant I don't want to go home with partially open slide. made with power gear.

[jeanmike]

try www.powergearus.com, then click on technical documents. Hope this helps

[Tha_Rooster]

i was able to locate a control programmer to straighten my slide which can be purchased for 675.00 just in case someone would like one or two.

[Clifftall]

Quote:

Originally Posted by Tha_Rooster i was able to locate a control programmer to straighten my slide which can be purchased for 675.00 just in case someone would like one or two.

Please post a link to this as I don't know what it is. Thanks

[Elkhartjim]

Quote:

Originally Posted by Tha_Rooster Does anyone know how to adjust the motor travel on a wall slide without a teach pendant I don't want to go home with partially open slide. made with power gear.

What is a "teach pendant"?

What is a "control programmer"?

Inquiring minds want to know.

[Tha_Rooster]

They are the same it's on power gears wep site 140-1176 is the part # full wall slides with power gear parts have 4 independent motors it is a hand held box with switches to turn and off each motor and sets how far to go in and out mine became crooked because of a cabinet door coming open jamming slide what a bad noise.

[Clifftall]

Quote:

Originally Posted by Tha_Rooster They are the same it's on power gears wep site 140-1176 is the part # full wall slides with power gear parts have 4 independent motors it is a hand held box with switches to turn and off each motor and sets how far to go in and out mine became crooked because of a cabinet door coming open jamming slide what a bad noise.