Side cameras not staying on when turn signal engaged

[Patrick1]

I have a 2009 Fleetwood 4oX and the side cameras do not stay on more than a half second when the turn signal is on. The view cuts back to the rear camera. How do I get the si de cameras to stay on while blinker is on?
All help is much appreciated!

[jrgreen]

Did it use to work and now does not? You can see the side camera view or the back camera view flashes and returns? The video control box is under the dash, left of the steering column on ours, maybe it went bad.

[Bfmorgan]

These cameras have a priority system when choosing the camera to display. Reverse will override the turn signal command, and show the camera at the rear of the MH. If this is happening, then your back-up lights are most likely also illuminated, even when in drive.

[Patrick1]

Originally Posted by Bfmorgan

These cameras have a priority system when choosing the camera to display. Reverse will override the turn signal command, and show the camera at the rear of the MH. If this is happening, then your back-up lights are most likely also illuminated, even when in drive.

Thank you for the direction it helped me get to a solution, after checking the lights and all the fuses I wound up looking at setting on Pioneer Navitrac unit and after I changed the System AV input to 'external' versus video and the Camera Polarity setting to 'Battery' versus Gnd. The side turn cameras now function correctly with turn signals and the rear camera works while in transmission is in reverse. If I want to see toad while we are driving I believe I will need to change camera polarity to Ground, but then the side cameras are not working in conjunction with the turn signals.
thanks again for the quick response.

[Patrick1]

Originally Posted by jrgreen

Did it use to work and now does not? You can see the side camera view or the back camera view flashes and returns? The video control box is under the dash, left of the steering column on ours, maybe it went bad.

Thank you for the direction it helped me get to a solution, after checking the lights and all the fuses I wound up looking at setting on Pioneer Navitrac unit and after I changed the System AV input to 'external' versus video and the Camera Polarity setting to 'Battery' versus Gnd. The side turn cameras now function correctly with turn signals and the rear camera works while in transmission is in reverse. If I want to see toad while we are driving I believe I will need to change camera polarity to Ground, but then the side cameras are not working in conjunction with the turn signals.
thanks for the assist