Today when I went to bring my DS living room slide it moved about 3" and stopped, nothing. Cheecked other slides everything was fine. Acted as if maybe a fuse blew. Couldnt find any fuses bad so I ran jumper wires from batteries and connected to motor and was able to bring slide in. After reconnecting motor it seem to work fine then I can put out and in. Would this be a sign of motor going bad or maybe just low power at the time.
Thanks
__________________
Pete
06 Fleetwood Revolution LE
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
I just answered a similar question for another post. I had a similar issue on a '99 Bounder. Turned out to be the topper awning. It was hanging up enough to keep the slide from going out all the way.
__________________
'04 Newmar MADP, 1100w of solar, Rubicon toad