Thermostat convert to digital

[Gregg]

Good morning guys,
Any info out there on converting my archaic analog temp control sliders to digital ??
For the life of me I can't figure out why Fleetwood would use analog, the thermistors go bad and the sliders are wildly inaccurate.
A while back I found a tutorial on how to mod the A/C fans to cycle with the compressor instead of staying on, I would love to find something like that for a digital thermostat conversion.

[Bob (WA0MQE)]

Gregg... did you do the mod... to cause the fans to cycle off w/ the compressor? Where can I find the tutorial for this modification?

[Gregg]

Hey Bob,
I did it a few years ago,
If I can find it I'll let you know.

[Gregg]

Found it Bob,
How bout an email address ??

[gresults]

Hunter 4299B Digital Thermostat RV Installation , http://www.klenger.net/RV_General/HV...structions.pdf , http://www.modmyrv.com/2008/07/14/rv-digital-thermostat here is few I ran across on the net.. Might be what you are looking for.

[lllkrob]

The one thing I haven't seen described is how to wire in a separate thermostat for the furnace in a Carrier A/C system. On mine the front a/c remote control controls the furnace through the temp sensor in the front a/c unit. So to have the furnace run you have to have 120Vac to the coach to power the sensor in the front a/c unit even though the furnace operates on 12V. This means you have to have shore or gen power to operate the furnace. I would like to install a thermostat just for the furnace without the need for the remote. Any ideas??