Trouble with my Flair

[cyann69]

Originally Posted by cyann69

The ignition relay fuse has no power but I did jump the solenoid and it started right up

But I'm still not sure what the problem is cause I don't want to use it with a jumper on the solenoid. Could it be the isolator relay delay because one of the dead wires I think comes from there?

[cyann69]

I'm so close to getting it fixed but I don't know what to do now

[cyann69]

don't understand it but I used the jump wire to get it home and then took it off for the night and now everything is working like always did. I don't know what the problem was but thank you to everyone for all your help and suggestions.

[wildmanbaker]

Your "right" solenoid is either intermittent, or the disconnect switch has a loose wire, or is intermittent. Could also be a corroded connection.