Community Forums

Kingsransom · 07-05-2015, 12:15 PM

HELP. .. We have a 2013 Bounder, 35K. Our vacuflush quit without warning. From other threads we found the circuit breaker, and it is not working correctly. We are concerned that a clog in the vacuflush pump has caused the breaker problem. We would like to inspect the pump, if we could find it! Anyone know where it is in our model? With a holiday weekend, we can not get service, or call Fleetwood for info.

JBP · 07-05-2015, 02:14 PM

The best way to get to the pump is in the last bay. This is a pass through bay. Climb into it and about 1/2 way across on the forward wall is an access door. unbolt the door and the pump is right there. It is very crowded. have your DW or someone hand you the tools that you need. I think that the 2013 35K is the same as the 2014 35K.
Best of luck. Are you on the road?

mchero · 07-06-2015, 08:25 AM

Make sure you have a bucket and a hazmat suit!

Kingsransom · 07-06-2015, 11:07 AM

Quote:

Originally Posted by JBP

The best way to get to the pump is in the last bay. This is a pass through bay. Climb into it and about 1/2 way across on the forward wall is an access door. unbolt the door and the pump is right there. It is very crowded. have your DW or someone hand you the tools that you need. I think that the 2013 35K is the same as the 2014 35K.
Best of luck. Are you on the road?

Thanks for the info. We are in Moab, UT, and no one here will work on it. We are going to move to Grand Junction ,CO for RV repair there. Thanks for the location info, at least we can tell the repair person where it is. Most repairs here are for 5th wheels & travel trailers, not class A.