Bounder: water leak 34f right side pass area

[savitbound]

a 2005 34f bounder right side water leak,not the w/s ican see all of it,it comes down and hits the r/s dash top also runs along the bottom of the wood cabinet and drips into the cup holder,I just sealed with Dicor all of the cap and roof seam and all the marker lites, still leaks,no sign on sealing of water leak! HELP!

Sal Avitabile Thanks

Ps no signs of water in the cabinets

[nightriderrv]

Did you put the antenna boot down and seal it up? check the awning bolt holes on the top, radio antenna

[The General]

Originally Posted by savitbound

a 2005 34f bounder right side water leak,not the w/s ican see all of it,it comes down and hits the r/s dash top also runs along the bottom of the wood cabinet and drips into the cup holder,I just sealed with Dicor all of the cap and roof seam and all the marker lites, still leaks,no sign on sealing of water leak! HELP!

Sal Avitabile Thanks

Ps no signs of water in the cabinets

Sal,

Let's start with the obvious areas:

Airconditioner:
4 ceiling bolts can be loose; seal may not be compressed enough to prevent leaks.

4 Clearance lights on front cap:
These are notorious points of leakage and should be sealed with 50 year clear silicone applied under base and also between lense and light but don't forget to coat the retaining screw located at top of lense.

Hope this helps; it helped me,

[savitbound]

sealed all lights sealed cap seam ,results same leak ,no signs of leaks on ceiling anywhere im trying to add photo ,leaking by that gray piece right a wind shield!

[The General]

Originally Posted by savitbound

sealed all lights sealed cap seam ,results same leak ,no signs of leaks on ceiling anywhere im trying to add photo ,leaking by that gray piece right a wind shield!

Next: Seal outside windshield with a bead of silicone (all the way around and lift seal between glass and rubber to apply.)
Ventury action can suck water in spots that are open but very small.

[nightriderrv]

You can take soapy water in a spray bottle and spray it on the seal on the inside have someone on the outside with a air nozzle have them spray between the body and seal if there is a leak bubbles will show