|
I don't have any thing on paper but maybe I can type you through it. The solar panel, positive lead connects to the LED assembly. All grounds are common. The power then goes to the Battery Control Center, 5 amp fuse. Check the fuse first. You will find the BCC wiring print on the inside of the BCC cover. Then check both LED wires to ground, with the connector unpluged. You should see a 1.8 volt drop between the two wires. If you see voltage on one wire the LED assembly is bad. No voltage on either wire means the solar panel is bad. Was that as clear as mud?
__________________
Richard & Michêle Shields
95 Bounder 32H F53
|