Add water pump switch

[phays]

Have a 2000 Magna with only one water pump switch over the dash. I want to add a switch in the bath area. Anyone done this and how did you do it?

[Roy1]

If your pump is located under the bath area like mine is the easy way would be to install a switch in the bath area and connect one side of the switch to a hot 12 volt circuit in the bath area probably a light circuit if the wires are heavy enough. #14 is big enough then connect the other side of the switch to the hot side of the pump. Only thing here is 2 different circuits would be feeding the pump the light circuit fuse and the pump circuit fuse. Another way would be to use these wires to power a small single pole 12 volt relay and place it next to the pump but the problem would be getting the 12 volt hot wire from the pump fuse to the relay or a new 12 volt source. Either way would work ok in my book but your pump could be located somewhere away from the bath area.

[phays]

Solved my problem. I used a wireless remote control relay. Wired it across the switch terminals and now can switch the water pump on or off from the rear of the coach.