I had one positive response from the internet today that includes one of the 3 pieces I am looking for. The most important part, the other pieces are minor and I could live or work around them missing. I will try some of the local bone yards, repair places and mom/pop shops, taking the pieces and try to match up.
My issue was self inflicted and deals with melted plastic parts. My last return found me emptying the frig, turned off the power inside the frig but did not turn off the breaker on the main panel. Turning off the power does not turn off the lights, only the compressor. The lights were left on until the next day because I left the doors slightly ajar to air it out. Next day I did see the light on and shut off the power at the breakers. Thought no more about it, couple days ago I went to close the doors and the right door would not close smoothly. I looked and looked and finally noticed that the 2 light bulbs just inside the door were actually hanging down low. Why? They had gotten the plastic so hot that it melted their support bracket and they were hanging down low enough that it kept the door from closing without pressure.
One bulb actually was touching the Dairy door that is the top shelf on the inside of the door and it is bowed in and looks ugly. What a disappointment, these are not easy parts to find since they discontinued this model (as they do all models every 3-5 years to sell more parts)
All the bulbs in the frig/freezer are 40W (original) but no matter, they are not designed to be left on for a couple days without cool air surrounding them. The heat was to much for the plastic and it became badly warped. It is an esthetic issue, but not so much that I am going to remove the front windshield . I had a chip in that earlier this year and it is a $3500 item.
SMLranger, if your compressor goes out, I may call you up to buy the plastic parts. I presume that you are now forewarned and will not warp your pieces like I did.
Thanks for your suggestions.