Dock/Curb Lights not working

[stonegully]

I have a 2000 Intrigue, 36 foot. I have power going into the curb light switch and leaving the switch, but lights are not lighting. All 4 bulbs check out as I applied 12 volts to the first, all four light. Any idea where the wiring goes when it leaves the switch? My manual says it is wire number 257, red, from "curb light switch" to curb lights.

thanks

[IASM]

On my 08 the curb lights go thru a relay.

[Rsponsford]

Check for power in and out of the curb light toggle switch. Your switch may have gone bad.

[stonegully]

I have power going into the switch and out. Does anyone know where the relay might be? Or a picture of it. I and my mobile mechanic of 30 years have looked in the driver's bay and can't find it.

thanks

[dons2346]

I don't think out vintage coaches run the dock lights thru a relay

[Rsponsford]

Originally Posted by stonegully

I have power going into the switch and out. Does anyone know where the relay might be? Or a picture of it. I and my mobile mechanic of 30 years have looked in the driver's bay and can't find it.

thanks

My Concept also has a DC panel in the electrical bay and another one behind a well hidden panel in the stairwell.

[pogoil]

Mine a Concept as well has a 7.5 amp fuse in the panel left side of stairwell. I just replaced it as I blew it when replacing a bulb.


Pog.

[deandec]

My drive and dock lights are on Yellow 12 ga Wire 70 at a fuse in my front run box and relay #7 in the front run box.

That wire supposedly runs to the "dock lights switch and relay".