Quote:
Originally Posted by Skip426
Check transmission for fault codes.
If none , speed sensors are ok , then it's a communication problem, wiring connection at the head , or internal in the head .
|
Skip Thanks for the advice
That is what I was thinking maybe a speed sensor or one of the guys over at the CC Yahoo Group said
On the back of the speedo I'd a rotary dial marked "alternator range".
Write down where the arrow is pointing. Mine is C.
Rotate dial 5 turns to clean tarnish off the contacts. Leave in the proper position.
Done.
Speedo is Teleflex Morse 62544
Their number 941-538-7775
Foe now I'm going to use my Garmin for speed
2 stroker