Replace/Upgrade Keyless Entry

[DoubleCK]

The FOBs for the remote locking system for our Camper are shot.

Thought we would like to install a more current system.

Any suggestions?

Thanks,
Craig

[Ray,IN]

I assume you've replace the batteries already. Have you tried re-programming the box inside the MH yet?
When our Trimark keyless entry system quit (it was obsolete) I installed a new Trimark system.
New key fobs might be available, but you still have an old system in the MH.

[RJPerry]

[QUOTE=Ray,IN;3258520]I assume you've replace the batteries already. Have you tried re-programming the box inside the MH yet?

Mine quit working after I replaced my AGM coach batteries a while back. Replaced the battery in the key fob and couldn't even get the LED light to work??? How do you re-program and box and where is it?

Thanks!

[DoubleCK]

Our FOBs are wore out. The system is obsolete. Anyone know of a quality Upgrade/Replacement that might work?

[Ray,IN]

[QUOTE=RJPerry;3262520]

Originally Posted by Ray,IN

I assume you've replace the batteries already. Have you tried re-programming the box inside the MH yet?

Mine quit working after I replaced my AGM coach batteries a while back. Replaced the battery in the key fob and couldn't even get the LED light to work??? How do you re-program and box and where is it?

Thanks!

I'm only familiar with the TriMark system Winnebago uses. My "box" is under the dash, accessed by removing the top of the dash cover, then hidden under all the wiring. It has a sticker on the box covering the reset button. I can't remember the exact procedure, mine died in 2013.
This old thread might be helpful.

[Ray,IN]

Too late to edit. Go to the last post of this thread, open the hot link/attached file. It has the reprogramming instructions for the old SCS remote unit, directly from the Winnebago/WIT news magazine.
It may not be your brand, but might contain something helpful.