Community Forums

mytime · 06-03-2015, 11:38 AM

My thermostat is not shutting down the A/C's at the proper temperature settings. I have tried to reset by removing the 12v fuse, so far hasn't helped. No florescent lights in or near the thermostat.
I was wanting to know if anyone has had similar problems, and what was the outcome.
2. If you know best places to purchase a new one?
I have 3 ac, and heat pumps and hydra heat.
Thanks, Marvin
Ps.. I am in the smokie mts., I checked CW and wow.

mytime · 06-04-2015, 05:43 AM

Well, I seemed to fix my problem.
The orientation of the site I am parked on put the side of the mh towards the afternoon sun, so the wall sensors were effected. I pulled two of them out of the wall as much as possible and let them hang out and the thermostat worked fine, so now need to figure how to shade or insulate the sensors from picking up the temperature from the wall.

**CLIFFTALL** · 06-04-2015, 05:58 AM

Thanks for the update. That seems to be a common issue . It's too bad that the guys that design these things don't spend enough ( if any ) time camping in them

.

Rusty Bear · 06-16-2015, 03:40 PM

I replaced my ZC Thermostat that runs my 2 Airs, and hydro hot. It would start showing oo and quit responding. I would reset (cut power to unit)and it would work for a while then do it again. We sometime leave our dog in the coach and we were worried that the Air Conditioners would quit on a warm day while we were away. It's an easy fix (Plug in replacement) It has been working fine since.