RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Monaco Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 09-20-2009, 09:29 PM   #1
Junior Member
Join Date: Sep 2009
Posts: 4
Red face 05 Cummins oil pressure sending unit location

The oil pressure guage on the dash of my Monaco Camelot with 400 ISL is not functioning. I purchased a oil pressure sending unit at cummins but can not find the location to replace it. I located what looks like an alluminum canister with two knurled knobs by the starter. On the cannister is a worn sticker that looks like it read oil and alladin on it, could that be it?
Appreciate any input. Thanks.

camelot05 is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 09-20-2009, 11:59 PM   #2
Senior Member
rex's Avatar
Monaco Owners Club
Join Date: Jan 2001
Location: Foley, AL
Posts: 1,247
The oil sending unit for the dash gauge will be located close to the oil filter. It will have from 1 to 3 wires depending on type. It will have a fitting on the bottom that screws into a port near the oil filter. It will normally be round with a slight rounded top, although the shape could be different on yours.

There is an oil sending unit on the engine also but that only transmits information to the ECM and not the dash gauge. That may be what you purchased from Cummins and you should not attempt to change it. It will look nothing like what I described above.


2001 Monaco Diplomat 40' PDQ - 08 Honda CR-V
rex is offline   Reply With Quote
Old 09-21-2009, 05:17 PM   #3
Junior Member
Join Date: Sep 2009
Posts: 4
Thanks for the info. I found the phone number for the Monaco LLC (Navistar) techs. He told me the dash guage oil pressure sending unit is on top of the engine on the drivers side next to the valve cover. He sent a picture of the part and the part number to my email.
camelot05 is offline   Reply With Quote
Old 09-22-2009, 12:31 PM   #4
Junior Member
Join Date: Sep 2009
Posts: 4
I incorrectly stated that I spoke to a tech @ Monaco LLC previously it was the parts department.
camelot05 is offline   Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Cummins Engine Oil Spray Langord Alpine Coach Owner's Forum 4 07-21-2009 02:28 PM
Cummins 8.9 425HP oil change Jeeperrmartin Winnebago Industries Owner's Forum 8 10-28-2008 10:30 AM
ScanGauge / Oil Pressure surfride Workhorse and Chevrolet Chassis Motorhome Forum 3 05-27-2008 11:49 AM
Oil Filter Location RVRon Monaco Owner's Forum 10 07-12-2006 05:43 AM
96 cat 3206 oil pressure light on duner bill MH-General Discussions & Problems 6 01-30-2006 08:38 PM

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 10:51 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.