Mine is a 2002 Windsor so it may be different but here goes:
On my slide there are 3 roller that support the slide. Two of them can be accessed from under the kitchen cabinet by lifting up the false bottoms and/or removing a drawer. The each roller has an adjusting screw/bolt that raises or lowers the slide.
The third roller has to be access from the front drivers side wheel well, there is a black plastic cover that has to be removed.
I had to raise up my slide as is was also rubbing, I only adjusted the 2 rollers under the kitchen cabinet. Once I did this the slide hasn't dragged since.
__________________
Jim J
2002 Monaco Windsor 38 PKD Cummins ISC 350 8.3L
2005 Jeep Grand Cherokee w/5.7 Hemi
|