RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Monaco Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 10-02-2019, 10:54 AM   #1
Junior Member
 
Join Date: Mar 2019
Posts: 10
2005 HR ambassador --ABS

My 2005 HR ambassador has a ABS light on.... any suggestions on what might be causing this to come on and probably fix. thanks Bill
__________________

Bulldog73 is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 10-02-2019, 02:18 PM   #2
Senior Member
 
CountryB's Avatar
 
Monaco Owners Club
Join Date: Aug 2017
Location: Orlando, Florida
Posts: 4,375
Most common cause is a wheel sensor issue. Visually look at the sensor wires - are any pulled loose/hanging. The sensor can also read faulty if the sensor gap (between the sensor head and tone ring) is too large, or if enough metal dust collects on the magnetic head of the sensor.

You should be able to run a self diagnostic (press the ABS diagnostic button and count the ABS warning lamp flashes).

Look for a button like this under the dash (the two buttons at the top are the ABS diagnostic buttons (one is for the Tag)
Attached Thumbnails
Click image for larger version

Name:	Under dash view.jpg
Views:	9
Size:	322.6 KB
ID:	262181  
__________________

__________________
Mike ----- 2005 Beaver Patriot Thunder CAT C13 525HP, 42-ft Tag, with HydraLift
*SMC-Bvr-Mnco Chassis/Suspsn/Info https://1drv.ms/f/s!AtvAXw_lfqbToxXYREK9YdBP08Jn
*SMC-Bvr-Mnco Wiring Diagrams https://1drv.ms/f/s!AtvAXw_lfqbTm0WTuuNqpn9a8hCh
CountryB is offline   Reply With Quote
Old 10-03-2019, 12:39 PM   #3
Senior Member
 
jacwjames's Avatar
 
Monaco Owners Club
Join Date: Jun 2014
Posts: 5,888
Here is a link to your manual if you don't have a copy.
https://www.holidayrambler.com/resou...Ambassador.pdf

On page 347 it has a description of the ABS system including fault codes. On page 348 it shows the ABS module located in your front drivers side run bay. Follow the instructions to try and retrieve the fault codes. If you do get a fault code you'll have to do a search for the code or post here and we should be able to help you with it.



I had a problem last month with mine, I hadn't driven for ~6 months and the ABS light stayed on. When I went to try and retrieve the fault codes I felt the button sticking. It had done this before, I rapidly pressed the button until it was free and the light went out. Dirt gets in around the button and vibration ultimately holds in in causing the light to stay on.


The last time I actually had a fault code it showed the front drivers side sensor as being bad. I pulled he sensor, reinstalled, and reset into the hole, pushing it all the way in tight. I then drove the coach and the ABS light went out.
__________________
Jim J
2002 Monaco Windsor 38 PKD
2005 Jeep Grand Cherokee w/5.7 Hemi
jacwjames is offline   Reply With Quote
Old 10-04-2019, 01:17 PM   #4
Junior Member
 
Join Date: May 2019
Posts: 22
Just had this problem. On my '04 Ambassador the ABS board is located in the lower left corner of the electrical bay on the left side below the driver's area. If pressing the test light doesn't initiate the ABS test (mine did nothing) it could be that little board. NW RV supply had a 'repair only' option for this board. It costs $114, if they can't fix it you'll get a $44 rebate. They were able to fix mine, 1200 miles and no problems, ABS light out. Good luck, safe travels.
__________________
2004 HR Ambassador 38PDQ, '17 Explorer toad
tomclayton1 is offline   Reply With Quote
Reply

Tags
abs



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
HR Ambassador :: 2012 Holiday Rambler Ambassador 2012 HR36pft iRV2 Owners Registry 0 05-12-2018 08:04 PM

» Featured Campgrounds

Reviews provided by


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 12:38 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
×