A-pillar

[caymann]

My BOSE 5.1 is located in the center console and the wires reach to the TV
I am assuming these wires travel through the A-pillar
What is the best way to remove the leather cover on the A-pillar so
i can access some of these wires and run additional wiring for other gadgets?
thanks
Jim

[Diplomat Don]

On the lower level Monacos they use a plastic cover for the A pillar. It can be taken off wit a lot of work. I've always removed a couple of screws and was able to pull it back far enough (fingers between windshield and pillar cover) to fish wires through. Using a coat hangar you can pull the center of the pillar cover back some and fish wires up and down.