Community Forums

mhgypsy · 02-20-2010, 03:44 PM

I have replaced the sensors in my grey and black tanks, and the owners manual goes thru a recalibration process that seems pretty simple, until you get to the part that says you have to put in a maintainance code number. (1218) Any idea where you have to punch in this code or do I have to take it in to a shop so a tech can plug in a "tool" and do it? The manual does say to have maintainance tech do this. Has anyone done this process?

Twomed · 02-20-2010, 08:17 PM

Main Menu..down to system options, toggle right.
System Options down to system setup, toggle right.
Number are entered by up/down/sideways.

Ps...I have the 33 page Monaco pdf for Aladdin, pm me your email if you would like to have it. Or MM can post it if she likes, great info piece.

distaff · 02-21-2010, 10:59 AM

Oh, please get MM to post it. The Aladdin system is a bit mysterious.

Twomed · 02-21-2010, 08:12 PM

Quote:

Originally Posted by distaff

Oh, please get MM to post it. The Aladdin system is a bit mysterious.

I sent the pdf to MM for posting. At 33 pages it is "the" word on Aladdin system.

pengman · 07-04-2010, 04:22 PM

Hi Guys:
New to this forum today. Google led us here in search of ALADDIN MANUAL.
Just bought Monaco Sig - no Aladdin Manual. There's some info in the owner's manual, but there HAS to be something better that a person with limited intellect can understand and use. Read posts here. Would GREATLY APPRECIATE knowing where I can access the PDF with the Aladdin info OR have it sent directly to me. Any help gratefully accepted.
P. Engman

pengman · 07-06-2010, 08:00 AM

Thanks for your HELP with the Aladdin Manual.
I'm covered for now. Sincerely appreciate your time and effort to be of assistance.
No more needed for now.
pengman

loufuchs · 07-06-2010, 09:08 AM

Quote:

Originally Posted by Twomed

Main Menu..down to system options, toggle right.
System Options down to system setup, toggle right.
Number are entered by up/down/sideways.

Ps...I have the 33 page Monaco pdf for Aladdin, pm me your email if you would like to have it. Or MM can post it if she likes, great info piece.

navalert@hotmail.com thanks a lot that would be a life saver

loufuchs · 07-07-2010, 09:19 AM

Please send mnual on aladdin to navalert@hotmail.com you're a life saver

rebelone · 07-07-2010, 03:18 PM

Please post for download, the Aladdin manual. I have one in my Monaco 2004 Camelot, Black tank read out stays on zero. Not sure where sensors are located. Maybe manual will show?
Thanks
Rebel

Pusherpilot · 07-07-2010, 05:42 PM

Quote:

Originally Posted by rebelone

Please post for download, the Aladdin manual. I have one in my Monaco 2004 Camelot, Black tank read out stays on zero. Not sure where sensors are located. Maybe manual will show?
Thanks
Rebel

On my 04 Imperial the tank sensors are on the end of the tanks on the driver side. Open the water works bay and look, or feel, up under the upper plastic cover for them. The sensors have a telco type cable clipped into them with the same connectors that the phones use. On mine the errant readings were caused by corrosion on the connectors contacts. cleaned them out with WD40 and burnished the contacts. Pretty reliable now.
Ron

rebelone · 07-08-2010, 05:57 AM

Thanks Pusherpilot
Will check that out.
Rebel

Harley03 · 07-08-2010, 06:05 PM

Noticed someone offered a copy of the Alladin Service/Owners manaul, but can't seem to locate the file. Any chance I could get a copy if convenient...I'm stumped on the calibration and electrical/engine monitoring sections.

Thanks!!

jcbagnall@gmail.com

rebelone · 07-11-2010, 01:13 PM

Help
My Alladin system seems to work as far as the readouts, the fresh tank shows empty or full as checked with dumping and filling. The grey seems to show empty and filling as used, black tank shows 0 empty, 0 full. I found the wires and checked connections all is in good working order. Calibrating problems reading the setup manual? What is the RAW value? that shows in unit. Anyone know what is Raw and where do these numbers come from?
Thanks
Rebel

Mike Canter · 07-11-2010, 01:40 PM

If you look at the calibration page at the bottom you will see the raw values. About the only time these are useful is when the tank is completely empty or full. When empty then read the raw value at the bottom of the page and insert that into the calibration for that tank. You can also do that when it is full.

I just had to change my black tank sensor because it would not read. If the gray and black tank sensor are close together then swap wires. If not then do it at the Aladdin box they plug into and see if the problem switches. If it does then time to buy a new sensor from MEGA RV parts.