Beaver Owners Technical Information

["007"]

Beaver Owner Technical Service Information.

[djhinds]

This should be made a STICKY on this forum.

Dave
With a non-internet friend who has a
2004 Beaver Marquis

2004 Monaco Signature
Detroit 60 Series
2011 Honda CR-V

["007"]

Its done.

[cold_one]

New to this forum. Also, I have just purchased a 2005 Patriot Thunder (Yorkton) and have just got it home; haven't even used it yet.

To start with everything was working (needed a safety check for purchase) but there was a engine battery issue at the dealer so it was charged for a couple of days. Now, I have a couple of problems The reason I am asking is two fold - (1) the passenger side signal lights don't work and (2) Kenwood touch screen (monitor/receiver) quit working.

Regarding the receiver I am looking for a main radio fuse as the one inline fuse was gone and replaced but the other line does not have power.

So a queston I have is where are all the fuses? The door at the front under the drivers window has a lot of blocks and relays - no fuses. The panel in the bathroom has only house fuses.

I would have thought there is a fairly easily accessible/visible fuse panel....

Any help or suggestions will be appreciated.

[djhinds]

You should post this on the Monaco Forum as you will get more answers there. This is a "Sticky" that stays on the top of the Monaco Forum.My non internet friend has a 2004 Beaver Marquis and his has no replaceable fuses, it has breakers in a bedroom cabinet that control most of the 12 volt.
Hope this helps
Dave

2004 Monaco Signature
Detroit 60 Series
2011 Honda CR-V

[zzzs]

Hi Cold One the outside door under the drivers window has all the 12 volt relays and thermal breakers. There is one for you radio, look at the legend taped to the inside of the bay door.

zzzs

[distaff]

Someone on this site recently pointed me at the 04 Ford F150, and indeed these are the same as the ones used on the Beavers. Monaco has them for $186 each, you can get the pickup lights for $90 a pair on eBay.

[distaff]

Got this from Monaco to help debug a problem.

Once you open it you need to open the "view" menu and turn off either Line or Wire Weight, what it is called depends on the version of your Acrobat viewer, but doing so will make it easier to read. Ctrl +5 also works on mine.

[pmcrw]

I have a 2001 monaco windsor and my turnsignal lights on the trailer dont work,but the taillghts do, there is no power coming out of the main harness in the engin bay, checked fuses but they were fine, was wondering if and were the relay and were would be located at, or any other sugestions to check.