Bedroom TV
I lost the signal to my BR TV, it went to snow. Running a new coax from the TV directly to the booster restored the signal, then I isolated the shield by removing the connectors on each end and cut back the shielding exposing the core wire and was able to get the signal back when I inserted into the TV and the booster. It appears the coax is pinched or worn through somewhere between the front and the back. The TV is in a slide and the coax goes under the floor via a tube next to the actuators. Any ideas?
This doesn't sound real clear to me even but hopefully someone will get the gist of my problem. Thanks in advance. Jim
|