Brake control wire

[nwokhunter]

Does anybody know if the brake control wire that is in the wire loom at back of coach is under the dash on 2007 HR Endeavor. I want to use it to back feed from toad to see if brakes are applied. I installed A/F one brake on toad would rather have light on console instead of windshield of toad.

[DennisZ]

I did the same that you want to do on my 2008 Endeavor. There is a plug behind the dash or in the LH console for the aunified brake controller. It took a lot of searching to find mine, it was tied into the harness behind the instrument panel.

Dennis

[H. Miller]

Yes it is. I called Monaco "technical" to find it.

[MikeyG]

I did the same thing on my Camelot a few weeks ago. Bought an LED from Radio Shack and mounted it in the dash. The only problem I had is the brake light in the toad overriding the turn signal from the coach. Roadmaster has a relay for that or you can do it with a brake light relay on the cold side of the barke switch in the toad.
Love the AFO.
Good luck.
Mike
2008 Camelot
2006 Jeep GC