Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Monaco Owner's Forum
Click Here to Login
Register FilesVendors Registry Blogs FAQ Community Calendar Today's Posts Search Log in
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 08-10-2017, 07:41 PM   #1
Senior Member
 
Join Date: May 2014
Posts: 868
Brake lights stay on

My brakes lights come on and stay on. It seems one of the three red wires that energize the relay is being energized from somewhere. I cut them apart and
I become energized and the circuit opens. I have disconnected one of the three
wires and every thing is working fine. Does anyone know where the three wires
come from. It would say a lot of tracing wire
oldguy70 is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 08-10-2017, 07:57 PM   #2
Senior Member
 
Arch Hoagland's Avatar
 
Monaco Owners Club
Workhorse Chassis Owner
Join Date: Aug 2002
Location: Clovis, CA, USA
Posts: 13,138
How to make a signature for your RV so we can serve you better.

1 .Click "User CP" on left side of the screen in about the middle.
2. Click "Edit Signature" on left side 7 bars down under Your Control Panel.
3. Fill out your signature information.
4. Click "Save Signature"
__________________
2004 Monaco La Palma 36DBD, W22, 8.1, 7.1 MPG
2000 LEXUS RX300 FWD 22MPG 4020 LBS
Criticism is easier than Craftsmanship
Arch Hoagland is offline   Reply With Quote
Old 08-10-2017, 09:08 PM   #3
Senior Member
 
Join Date: Aug 2015
Posts: 410
Probably a stuck relay. It would help if we knew what your coach is.
Dave
Woodman018 is offline   Reply With Quote
Old 08-11-2017, 06:15 AM   #4
Senior Member
 
K7JV's Avatar
 
Join Date: Jul 2006
Location: Boise Valley (SW Idaho)
Posts: 2,018
If you have an '06 Dynasty or one of its close cousins, I can help you.
__________________
Jim & Angie, Boise, ID
2021 Entegra Esteem 27U
2017 GMC Acadia Denali
K7JV is offline   Reply With Quote
Old 08-11-2017, 06:47 AM   #5
Senior Member
 
Join Date: May 2014
Posts: 868
Sorry I forgot to say I have a 98 Dynasty.
oldguy70 is offline   Reply With Quote
Old 08-11-2017, 07:17 AM   #6
Senior Member
 
Join Date: May 2014
Posts: 868
Sorry Arch I can't find the CP. I am not the greatest with computers
oldguy70 is offline   Reply With Quote
Old 08-11-2017, 07:58 AM   #7
Senior Member


 
Join Date: Aug 2015
Posts: 6,964
oldguy70-

Here's a screenshot that shows where to find the User CP (Control Panel). It also shows the same instructions as Arch provided.
Attached Thumbnails
Click image for larger version

Name:	screenshot.jpg
Views:	75
Size:	237.2 KB
ID:	172497  
__________________
Mark
2008 Holiday Rambler Admiral 30PDD (Ford F-53 chassis)
2009 Honda Fit Sport
l1v3fr33ord1 is online now   Reply With Quote
Old 08-11-2017, 05:44 PM   #8
Senior Member
 
Join Date: May 2014
Posts: 868
Drove for awhile this morning and it didn't feel as if the exhaust brake was coming on although it was shifting down so I hook the wire back on. Drove for about ten minutes and the throttle jumped back to one third. As the was no where to pull over I kept the peddle floored and a few minutes it came back to normal and has been good the rest of the day. I'm driving across the norther route across Ontario, so basically I'm in the middle of no where.
__________________
Peter
36 ft. 99 U320 foretravel 36 ft. 98 Dynasty
98 Suzuki Sidekick Sport 4 door
oldguy70 is offline   Reply With Quote
Old 08-12-2017, 06:09 PM   #9
Senior Member
 
Join Date: May 2014
Posts: 868
I Had issues today and did a temporary rewiring and it is running fine everything working but I have disconnected two wires that I would really like to know where they come from
but tracing wires though the mess that Monaco wired is a nightmare. I had a great wiring
diagram that Monaco sent on my computer but can't find it.
__________________
Peter
36 ft. 99 U320 foretravel 36 ft. 98 Dynasty
98 Suzuki Sidekick Sport 4 door
oldguy70 is offline   Reply With Quote
Old 08-14-2017, 06:02 AM   #10
Senior Member
 
Join Date: May 2014
Posts: 868
The two wires come out of a box under and to the front of the shifter and it says Allison
on it. As it is running great I will leave it until I can find out more. I don't suppose anyone
knows
__________________
Peter
36 ft. 99 U320 foretravel 36 ft. 98 Dynasty
98 Suzuki Sidekick Sport 4 door
oldguy70 is offline   Reply With Quote
Old 01-13-2018, 06:28 AM   #11
Senior Member
 
ladagobago's Avatar
 
Winnebago Owners Club
Freightliner Owners Club
Join Date: Dec 2010
Location: DW Driver - Englewood FL
Posts: 1,448
Blog Entries: 11
did you ever find the problem???
__________________
La Dagobago
99 36 FL Winne Chieftain 5.9 ISB Turbo Cummins DP, 24' box with HD Sporty Hobby of 1970's Suzuki dirt bike restoration. Visit my blog.
ladagobago is offline   Reply With Quote
Old 01-13-2018, 09:16 AM   #12
Senior Member
 
Join Date: May 2014
Posts: 868
The two wires come from the Vim and the last time I worked on it I was in Ontario. I have
the two wires disconnected and it has been working perfectly since there and I got back
to home in Burnaby BC. I have been up to Whistler at least 4 times and every thing has
been working fine. Now I just have to find out my other wiring problems, will open a
new post.
__________________
Peter
36 ft. 99 U320 foretravel 36 ft. 98 Dynasty
98 Suzuki Sidekick Sport 4 door
oldguy70 is offline   Reply With Quote
Reply

Tags
brake, brake lights, light, lights



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
No signal lights, headlights, docking lights, brake lights dvleemin Class A Motorhome Discussions 10 08-06-2017 05:01 PM
Marker Lights & Tail Lights Stay on When Engine is Running Petro Freightliner Motorhome Chassis Forum 4 10-12-2016 05:15 PM
Marker lights,clearance lights and brake lights Ahall Entegra Owner's Forum 1 04-18-2014 05:39 AM
Brake lights stay on when jake brake is turned on BOSSHOG1 Class A Motorhome Discussions 10 10-26-2013 11:19 AM

» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 02:47 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.