Clearance Lights 05 dynasty

[Barlow46]

Thanks to a post back in 2009 made by Rex, I was able to get some new lens for my deteriorating clearance light lens. The lights were made by Kaper II in Kelson WA. I called today and talked with Matt about my lights. He identified them by the number 1AS20 and 1RS20 for both amber and red. The cost was $1.00 each plus shipping. Here is the link with the phone number if anyone needs these lights. They can be identified by the "KII" on the lens surface. Contact: Kaper II

Thanks Rex!

[Mike Canter]

I could believe how bad my Kaper II lenses cracked. I have replaced all mine with Bargman LED light. They are better made and use the same screw holes.

12v LED Lights for RV from Bargman - PPL Motor Homes

I shopped around and found them cheaper on the web but can't remember where

[Rfw1955]

Mike,
Are your marker lights model 58? Do you have to replace the base plates? Or does the light unit plug into existing base plates?
Please let me know thanks

[Rex]

Barlow46, glad I was helpful.

[Mike Canter]

I changed out the whole unit because some of the Kaper bases were also cracking. Both the upper front and rear lights are silicone sealed so it is a little bit of a pain to do.

[Barlow46]

Quote:

Originally Posted by Mike Canter I changed out the whole unit because some of the Kaper bases were also cracking. Both the upper front and rear lights are silicone sealed so it is a little bit of a pain to do.

Mike, that was why I went ahead and replaced just the lens. My bases looked ok but they were also embedded in a recess with silicon and it looked like a full day's work to dig it out and replace all of the markers. I think I will save that for the cool days and go ahead and do LED's when I change.