Day nite pleated shade in slide

[Dupdyke]

The string broke in the driver slide pleated day nite shade. I know what it takes to fix but I can not see how to get the shade down. Is it a clip or screws hidden behind the wood cabinets in the slide. 2003 Dynasty 42' 3 slide regal

[wrinkles]

Hi mine were screwed in on the metal bracket that holds the shade, they ran the screws straight up through the bracket. Hope this helps

[nodine]

Originally Posted by Dupdyke

The string broke in the driver slide pleated day nite shade. I know what it takes to fix but I can not see how to get the shade down. Is it a clip or screws hidden behind the wood cabinets in the slide. 2003 Dynasty 42' 3 slide regal

Should be screwed straight up into the valance.

Bob

[Dupdyke]

I found a set of screws that easily remove the valance and there are grey plastic snap clips on the back side that let the shade come out in one piece

[Steve N Sal]

I know getting our day/night shade out was a bugger in ours. We don't have a Dynasty but sounds like a similar install. The cabinets in front of the shade make it tough. Took some doing but finally got it out. Putting it back wan't and easy task either. Getting them to clip into place to lock is a real pain. Not much room to work. Good luck and hope you resolve your issue.