Domestic Power on 97 Dynasty Duke

[NavySub761]

My father in law has a 97 Dynasty Duke and we are not getting any of the domestic loads to power up. At the driver side fuse panel we get dc voltage on everything except the domestic loads. I see that it is fused to ground, but can't find where the hot is coming from. In the back in the engine bay, we have dc voltage headed forward... any idea where we are losing this power?

Thank you!

[jimkate]

As you walk in the door, one of the switches is the master switch. Good thing to make sure it is turned on. That switch operates a relay, I think you'll find it in the rear engine bay, it looks just like a Ford solenoid. If you use a jumper cable and bypass that solenoid, you just may find that the house power works just fine.