EMS Panel

[javpop]

I left home last Fri headed for San Diego. Last night I ran my generator and my EMS panel kept blinking and the digital readout also blinked in and out. After a while they both settled down and looked as though they were o.k. Tonight I am a a campgound in NM. I am hooked up to 50amps and the same thing is happening. The lights on the right side of the display were blinking for about 15 min., then they stayed lit (This is the ones that list the major draws on the system.) The indicator LED's that display the actual draw on the system has not lit yet. The indicators that list the available amps is on 50 and the a/c works but the displays are messed up. Any ideas on what to check, I am reset the breakers in the closet and disconnected and reconnected the shore power. Thanks.

[Diplomat Don]

javpop......I'm not sure if the EMS panel has any link with with the inverter. I have the same coach and when the inverter display goes wild, the fix is to unplug the telephone connector from the inverter (front of the inverter in your last passenger bay), wait a few seconds and plug it back in.

Like I said, I'm not sure if the inverter would have influence on the EMS, but worth a try.