Flat screen TV removal

[jrusselltx]

I want to get to the back of our flat screen TV in front to add some cables for other HDMI inputs. The front around the TV comes off easily enough with 4 screws. After that, it isn't obvious what has to be removed to get the TV to come out. Any ideas?

2007 Knight PDQ
Sharp TV (32 inch I think)

[rmcb]

If its like mine, you need to take out screws along the sides of the aluminum bracket holding the TV. They can be accesed from the rear of the tv after pulling the louvered panel off.

[jrusselltx]

Thanks. As usual this forum has lots of knowledgeable people. I though that panel was attached by internal screws. Now I don't even need to remove the TV because that panel gives me access to the inouts, which is what I really wanted anyway.

[Jeep trekker]

I don't know if yours is like my 07 Camelot. On mine there is a wooden louvered panel on the back of the TV cabinet (facing the windshield) that pops off. It is held on buy cabinet latches. That give me access to all the sockets on the back of the TV.