To answer your question, there is most likely a part# on the old ones.
Option2. post a picture of it here at iRV2
Lots of options out there.
To answer your question, there is most likely a part# on the old ones.
Option2. post a picture of it here at iRV2
Lots of options out there.
When I did mine I swapped them all out ....they now all look the same (including brightness) and are very bright with 10 leds per light, and reasonable
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
A couple of notes: My upper clearance lights were glued in with a very strong bonding glue and took some effort to remove them. I sure they are glued in to be weather tight... when I reinstalled them I used RTV.
2. Should you decide to replace the lights pay close attention to not letting the wiring fall back down inside the light mounting hole into the coach... or you could be in for a fishing expedition
Happy Hunting