I have an 03 Windsor and I'm sure its the same .
When I replaced mine it was just a little close coming out but you wont
have a problem .
Be sure to label the wires and the screws are not evenly spaced so you
can note the positioning or keep rotating till the holes
lined up like I did .
Noting the position is a better idea .
I have a problem with mine where the gauge will read way off sometime
when the lights are turned on , I believe its a ground issue at the gauge .
I haven't looked into it since I try not to drive after dark so its not a big deal .
Ray & Marilyn
03 Windsor