Fuel water separator electronic purge

[Andy M]

Can someone give me a little education on how this system exactly works. I would also like to know what the steps are to change this filter/water separator. Thanks.

P.S. I have this on my coach.

[Andy M]

Can someone give me a little education on how this system exactly works. I would also like to know what the steps are to change this filter/water separator. Thanks.

P.S. I have this on my coach.

[chuck4788]

Yours looks a little different than mine. Mine has a metal bowl on the bottom of the filter element with a electrical plug for the water sensor and a 1/4" tubing connection for water purging. The control panel has two buttons and lights. With the ignition key "on" if you push the purge button the filter system go thru a purge cycle and pump fuel thru the filters to purge air. I do this twice when changing filters and have no problems when restarting the engine.

[GoneFishin]

Andy M, can you tell us more about your motorhome? (year, model, etc) It's not included in your profile or your signature. Thanks!

[Andy M]

1997 Dynasty 325hp

[MonacoMama]

Andy M..I am going to link this down to the Cummins Forum. You might get a better response from the "iRV2 Tech Heads"

Good Luck!

MM

[Ecker]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Andy M:
Can someone give me a little education on how this system exactly works. I would also like to know what the steps are to change this filter/water separator. Thanks.

P.S. I have this on my coach.

=============================================
This is supplied by Monaco so best I can do is refer to this page which is a little hard to read.

http://www.monacoers.org/racor.htm

</div></BLOCKQUOTE>

[Andy M]

Perfect, thank you.

Now I will try to get a copy sent either by email or faxed.

[pat s.]

Andy

Your unit is model 90s1230c

The replacment filter 200200 is no longer available. Winn/Racor has an upgrade kit number RK12963 is available from www.rvchassisparts.com
Part number is 0340-hh3-001($69)
It has an upgraded water sensor and a larger capacity metal bowl. After upgrade the new filter will be number S3230P
The see thru pre-filter is number 300200, it is however washable. If you need service instructions you can e-mail me at patsmith@dunnhardware.com and I can fax a copy.

Pat

P.S it's been over 3 years since the upgrade so I would do it right a way, it takes about 10 min.