Full wall slide

[montiem]

2008 Knight DFT, I have three sides, two smaller one large, the smaller ones seem to close all the way but when I close the large slide it seems to be tight on the sides but there is a gap at the bottom the weaterstrip does not touch the body. The gap is large enough that you can put your fingers between the weatherstrip and the body, about 3/4", I have no air noise inside the coach and feel no air. Is this normal for a larger slide

[Robin_M]

That's not normal. If your full wall slide is hydraulic, try this procedure. If that doesn't help, it may be that the slide is adjusted too high, which would cause it to make contact at the top before it does at the bottom. There are adjusting screws under the outside edge of the slide. You may want to check with a shop before attempting the adjustment - I've never tried it, so cannot be sure of results.