Fuse Schematic on 2000 Dynasty

[patmsp]

I have a 2000 Dynasty (1999 Frame). I had some work done on my rig at a recent visit to Camping World (5th visit for the same problem, but that's another story). The technician failed to secure the basement door, under the driver where all the fuses are located. It flapped up and down as I was driving down the highway. Numerous truckers were honking at me and also several cars. We could not find the problem (door did not flap open when we were parked). We finally unhooked the TOAD and the DW was able to drive up along side the rig to let me know the problem.

We secured the door and all was well. But, the schematic, that was glued to the door was lost. Could someone mind taking a picture of their schematic and sending it too me?

I'll gladly purchase you a beverage of choice (or two) for the favor.

Pat

[pcarrell]

You may have the schematic in your owners manual. My manual has mine.

[oldtymer]

patmsp

I have a 2000 dynasty and would be happy to post a picture of the fuse schematic. My dynasty is a 40 King model. It may take me a day or so to get the picture posted.

[patmsp]

I don't have the schematic.... I checked.

Old tymer... I'll take you up on your kind genrousity.

Pat

[oldtymer]

Pat

I have attached a picture of my fuse schematic. The notation on the top 3 relays are blurred so here is the information on those relays from top down.

209 - ABS Light
019 - Engine Brake
019 - Driving Light

I could read everything else when I printed this on a 8X10. Let me know if you have further questions on this schematic.

Pat, where in East TN do you winter. I am located in Ten Mile, TN.

Regards

Steven

[patmsp]

Thank you so very much for the schematic. That was awfully nice of you to go to the work of getting this to me. If we ever meet, I'll be happy to buy you your beverage of choice.

We live about 9 miles east of Lafollette. We are up in the mountains overlooking lake Norris.

It looks like we are about 100 miles apart.

Pat